One Fairly Appointed Honda Valkyrie!
by Mark Tobias
Some visible mods: Hondaline triple tips, Cross Country LeatherLykes, Utopia backrest, chrome side covers, dipstick and oil filler cap, Baker Air Wings, removed Valk emblem, Hadley air horn, SS Rifle windshield and more!.  Note the Rifle windshield rake due to Bracket Modification.. 

image.jpg (39571 bytes)

back

image25.jpg (94836 bytes)
Rally 50W amber halogen spots on Rifle billet fork clamps
image26.jpg (111339 bytes)
Spots kit include relay, wires, switch, fuses.
Available at Pep Boys
image27.jpg (96476 bytes)  
image29.jpg (90994 bytes)
Auto Door Trim
Pep Boys
image30.jpg (109977 bytes)
   
image33.jpg (91725 bytes)
Two Bros. Oil Temp guage Dipstick
Available: D&K
image34.jpg (110716 bytes)
   

image04.jpg (87722 bytes)
LeatherLyke Cruiser bags, Hondaline TripleTips, Hondaline chrome side coverUtopia driver's backrest, Rood Saddle mod


   

image20.jpg (96112 bytes)
Baker Air Wings - light smoke polycarb with chrome hardware
open position

image13.jpg (102960 bytes)
Baker Air Wings - closed position

   

image02.jpg (87697 bytes)
Vista Cruise throttle lock

image18.jpg (90955 bytes)
Oversize foam & chrome grips - brand? helps carpal tunnel - from Honda dealer

   

image19.jpg (110169 bytes)
Baker wings, chrome side cover, Rood saddle mod

image15.jpg (92247 bytes)
Hondaline lugage rack

 

 

Klockit clock "Insert" part number 15265. 1 7/16" O.D. cost $7.25 + shipping. 1-800-556-2548
Bezel is 1-1/4" X 1/2" drive 12 pt. socket. The fit is tight behind the triple clamp. My socket just fits and mics at 1.615" O.D. Clock snaps in place. Replace tank bolt with 6mm X 45mm bolt and fender washer inside the socket. I had to grind one side of the O.D. of the fender washer, and used a Dremel to add a little clearance at my chrome tank trim.
The clock is not waterproof but is shielded by the windshield. Cover with Saran Wrap when
washing.
clock01.jpg (86248 bytes) clock06.jpg (81143 bytes)  

Special thanks to Mark Tobias, owner.
back